Operation
This section of the manual discusses the operation of an MLS 608 D device, and is divided
into four sections:
z
Front Panel Features and Operation
z
z
Optimizing Audio — An Overview
z
Optimizing Video — An Overview
z
Front Panel Features and Operation
All MLS 608D models have the same front panel configuration.
MLS 608 D
AUX
VID
PC
DOC
CAM
Blu-ray
VOLUME
SOURCE SELECTION
CONFIG
R
MIC VOLUME
AV Switcher with ProDSP
™
LAPTOP
1
2
3
4
5
6
7
8
4
5
3
2
1
6
Figure 11.
MLS 608D Device Front Panel Features
a
Power and reset status LED
d
Source selection buttons
b
Reset button
e
Volume control knob
c
Front panel mini USB configuration port
f
Mic volume control knob
a
Power/reset status LED
—
This LED lights green when power is applied, and amber
when in power save (standby) mode.
It also indicates reset mode when the reset button is pressed (see method below).
b
Reset button
—
Press and hold this recessed button to reset the MLS switcher to one
of the two available reset mode: modes 1 and 5.
Reset as follows:
Mode 1
—
Revert to factory firmware version where incompatibility issues
occur with user loaded firmware
.
To reset temporarily to the factory default firmware, press and hold in the reset button
while applying power to the unit.
NOTES:
• After a Mode 1 reset, update the firmware to the latest version.
DO NOT use the factory firmware resulting from the reset.
Factory firmware must be re-uploaded if that is the version to be used.
• If you do not want to update the firmware, recycling the power reinstates the
firmware version used before the Mode 1 reset.
MLS 608 D Series • Operation
20
