manualshive.com logo in svg

Extron electronics MLS 608 D SA, User Manual

Share
Download
Extron electronics MLS 608 D SA User Manual Download Page 48

Firmware Upgrades

Within the DSP Configurator software, the Firmware Loader option (click 

Tools > 

Firmware Loader

) opens the Extron Firmware Loader application, allowing the user to 

to load new firmware to their device, through either serial or USB connection.

In order for the Firmware Loader option to work, you must have the Firmware Loader 
application installed.

To download Firmware Loader from the Extron website

:

1. 

Open an Internet browser window and in the 

Address

 field, enter  

www.extron.com

.

2. 

In the 

Search

 field, enter

 

Firmware Loader

.

3. 

Press <Enter> on your keyboard.

4. 

Locate the Firmware Loader application in the search results and click 

Download 

Now!

5. 

Complete the personal information form, if necessary.

6. 

Click 

Download 

fw_loader_vxxxxx.exe

 to begin the download.

Follow the on-screen prompts to complete the download.

See the 

Firmware Loader Help File

 and supporting documentation for further information 

about using Firmware Loader.

Updating Firmware

NOTES:

 

• 

Before updating the firmware through DSP Configurator, the Firmware

 

   Loader application must be installed on your PC. 

See "To download 

   Firmware Loader from the Extron website"

 section. 

• 

You can download current firmware updates from the Firmware Download 

   Center page of the Extron website. This file downloads onto your PC.

1. 

Within DSP Configurator open the 

Tools

 menu and select 

Firmware Loader

.   

2. 

From the 

File

 menu of Firmware Loader, select 

New Firmware for Selected 

Devices

.

 

 
 
 

Figure 19. 

Firmware Loader — New Firmware for Selected Devices

- or -  
In the

 Devices

 section of the Firmware Loader main screen, double-click the 

New 

Firmware File

 field associated with the selected device. The Choose Firmware File 

dialog box opens.

3. 

Browse to and select the device-specific firmware file that has been downloaded on 
your PC. Valid firmware files have an S19 file extension.

 

MLS 608 D Series • Operation

42

Summary of Contents for MLS 608 D SA





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands