X1#
= Mic number (mute inputs): 40000 = Mic 1, 40001 = Mic 2
X1$
= Audio inputs 1-10: 1-8 = program audio inputs, 9 = Mic 1 input, 10 = Mic 2 input.
X1%
= Audio output number: 1-4
X1^
= Input signal peaking adjustment range: 0-255
X1&
= Skew adjustment value: 0-31, in 2 ns increments (for example 31 = 62 ns)
X1*
= Video plane: 0 = red, 1 = green, 2 = blue
X1(
= Input signal level adjustment range: 0-255 (default = 60).
X2)
= Output bass/treble master value
(240 to -240, default = 0), multiplied dB by 10.
(for example 230 = +23 dB, -210 = -21 dB.)
X2!
= DDC value (EDID). See table on next page
X2@
= Video group: 1 = VGA, 2 = HDMI
X2#
= Output selection: 1 = analog buffered VGA output on MLS 608 D, 2 = digital HDMI
output on MTP/HDMI U R.
X2$
= Analog EDID user definable locations: 49 = user 1, 50 = user 2.
X2%
= Digital EDID user definable locations: 51 = user 3, 52 = user 4.
X2^
= EDID: 0 = current assigned EDID, 1 = user loaded 49 when
X2@
= 1,
user loaded 51 when
X2@
= 2, 2 = user loaded 50 when
X2@
= 1, user loaded 52
when
X2@
= 2
X2&
= 128 or 256 byte EDID raw HEX (text form)
X2*
= Native resolution and refresh rate response, for example 1280x720@60
X2(
= Inputs 5 through 8 only (for HDCP commands)
X3!
= Input HDCP status:
0 = source connected but not HDCP compliant.
2 = no source connected.
1 = source connected and is HDCP compliant.
3 = HDCP status not known
X3@
= Output HDCP status:
0 = output connected, current input source encrypted, output is not HDCP compliant
1 = output connected, current input source encrypted, output is HDCP compliant
2 = no output connected
3 = output connected, current input source is not encrypted or not connected,
output HDCP status not known
X3#
= HDCP notification = green screen notification on the output when a source is non-HDCP
compliant: 0 = black, 1 = green (default)
X3$
= Power save mode: 0 = off (default), 1 = on
X3%
= Firmware version number (x.xx)
X3&
= Device part number:
60-1050-01 = MLS 608 D
60-1050-02 = MLS 608 D MA
60-1050-03 = MLS 608 D SA
X3*
= MLS 608 D, or MLS 608 D MA, or MLS 608 D SA
X3(
= Video signal status: 0 = video /TMDS not detected, 1 = video /TMDS detected, - = unknown
X4)
= Voltage in volts (V)
X4!
= Temperature in degrees C, response is three digits with leading zero (31°C = 031 ).
X4@
= Audio mute to DSP: 0 = audio unmuted, 1 = audio muted
MLS 608 D Series • SIS Programming and Control
65
