Command and Response Table for SIS Commands (continued)
FOX II T HD 4K Transmitter • Remote Control
18
Command
SIS Command
(host to unit)
Response
(unit to host)
Additional description
Video bit depth (HDMI loop-through)
Set video bit depth to auto
E
V0BITD
}
BitdV0
]
Follow the input bit depth.
Set video bit depth to 8-bit
E
V1BITD
}
BitdV1
]
Force 8-bit depth.
View video bit depth
E
VBITD
}
X^]
Input reports as an HDCP authorized device
HDCP authorized device on
E
E1HDCP
}
HdcpE1
]
Set the transmitter as an HDCP-authorized device
(
default
).
HDCP authorized device off
E
E0HDCP
}
HdcpE0
]
Set the transmitter as
not
an HDCP-authorized
device.
View HDCP authorized device
status
E
EHDCP
}
X%]
Show HDCP authorized device status.
HDCP mode
Set HDCP mode to auto
E
S0HDCP
}
HdcpS0
]
Follows input (
default
).
Set HDCP mode to on
E
S1HDCP
}
HdcpS1
]
View HDCP mode
E
SHDCP
}
X&]
Digital output format (HDMI loop-through)
Set the format to auto
E
0VTPO
}
Vtpo0
]
Follows input (
default
).
Set the format to DVI
E
1VTPO
}
Vtpo1
]
Set the format to HDMI
E
2VTPO
}
Vtpo2
]
View format
E
VTPO
}
X*]
Analog audio input gain and attenuation
NOTE
: The set gain (
G
) and set attenuation (
g
) commands
are
case sensitive. The increment level, decrement level, and show level
are
not
case sensitive.
Set input audio gain to a +dB
value
X(
G
Aud
X1)]
Set the input level to
X1)
dB (gain).
Example:
2G
Aud2
]
Set the input level to +2 dB (gain).
Set input audio attenuation to
a -dB value
X1!
g
Aud
X1)]
Set the input level to
X1)
dB (attenuation).
Increment input level
+G
Aud
X1)]
Increase the audio level by 1 dB.
Example:
+G
Aud3
]
Increment the input level from +2 dB to +3 dB.
Decrement input level
–G
Aud
X1)]
Decrease the audio level by 1 dB.
Show input level
G
X1)]
Audio input format
NOTE
: This command selects the audio input that is transmitted to the receiver.
Select auto
E
I0AFMT
}
AfmtI0
]
Transmit the digital audio embedded in the HDMI
input, if detected, otherwise transmit the analog audio.
Select digital audio
E
I1AFMT
}
AfmtI1
]
Transmit the digital audio embedded in the HDMI
input.
Select analog audio
E
I2AFMT
}
AfmtI2
]
Transmit the analog audio input.
Show audio selection
E
IAFMT
}
X1@]
Show the selected format.
KEY:
X%
= On and off status
0
= off (disabled)
1
= on (enabled)
X^
= Video bit depth
0
= auto mode (
default
)
1
= 8-bit
X&
= HDCP Mode
0
= auto (
default
)
1
= on
X*
= Digital output format
0
= auto (
default
)
1
= DVI
2
= HDMI
X(
= Audio gain adjustment range
00
to
24
X1)
= Audio level adjustment range
-18
to +
24
(in 1 dB steps)
X1!
= Audio attenuation adjustment range
00
to
18
X1@
= Audio input format
0
= auto (
default
)
2
= analog audio
1
= digital (embedded HDMI) audio
Summary of Contents for FOX II T HD 4K
Page 6: ......
