DTP2 T/R 211 • Introduction
3
•
DTP2 R 211 inputs and output
—
•
Input:
One DTP2 twisted pair input on RJ‑45
•
Outputs:
One HDMI, stereo audio on captive screw
•
DTP2 T 211 inputs and output
—
•
Inputs:
One HDMI, one 3.5 mm stereo mini jack for audio
•
Output:
One DTP2 twisted pair input on RJ 45
•
Supports computer and video resolutions up to 4K/60 @ 4:4:4
— Support of
4K/60 at 4:4:4 chroma sampling requires connection to a matching DTP2 product.
•
Stereo audio de-embedding (DTP2 R 211)
— The captive screw stereo output is
selectable for de embedded or pass‑through analog audio.
•
Analog stereo audio embedding (DTP2 T 211)
— Analog stereo audio signals can
be selectively embedded onto the digital video output signal and transported over DTP.
The DTP2 T 211 can be set to pass the embedded digital audio, embed the analog
audio, or to automatically embed the analog audio when no digital audio is detected.
•
Accepts additional analog stereo audio signals
— The DTP2 R 211 accepts stereo
analog audio from a DTP enabled product. The DTP2 T 211 accepts stereo analog
audio signals for simultaneous transmission over the same shielded twisted pair cable.
•
Supported HDMI 2.0b specification features include data rates up to 18 Gbps,
HDR, Deep Color up to 12 bit, 3D, HD lossless audio formats, and CEC pass-
through
•
Support for HDR (High Dynamic Range) video
— Enables greater contrast range
and wider color gamut by providing the necessary video bandwidth, color depth, and
metadata interchange capability for HDR video.
•
Supports EDID and HDCP transmission
— DDC channels are actively buffered,
allowing continuous communication between source and display.
•
Remote power capability
— For simplified installation, the transmitter can be remotely
powered by a DTP2‑enabled product over the twisted pair connection. It can also be
configured to provide power to the connected DTP2 receiver product.
•
Supports Consumer Electronics Control (CEC) signal transmission
— CEC
control passes through from the transmitter to the receiver.
•
Bidirectional RS 232 and IR pass-through for AV device control
— Bidirectional
RS 232 control and IR signals can be transmitted alongside the video signal, allowing
remote AV devices to be controlled without the need for additional cabling.
•
Supports multiple embedded audio formats
— Compatible with a broad range of
multi‑channel audio signals, providing reliable operation with HDMI sources.
•
Front panel USB configuration port
— Provides convenient access for information
and firmware updates.
•
LED indicators for signal presence, power, and link status
— Provide visual
indication of system status for real‑time feedback and monitoring of key performance
parameters.
•
RJ 45 signal and link LED indicators for DTP port
— Provide a means for validating
signal flow and operation, allowing quick identification of connectivity issues
•
1-inch high, quarter rack width, metal enclosures
— With low profile enclosures,
the transmitter and receiver can be discreetly installed in locations such as behind a
plasma or LCD flat‑panel display.
•
Includes LockIt HDMI cable lacing brackets
— LockIt lacing brackets are used to
secure HDMI cables connected to the HDMI input and output connectors, preventing
accidental disconnection of the cables.
