27
DTP Cr
ossPoint 4K Series • Remote Contr
ol
Command
SIS Command
(Host to Unit)
Response
(Unit to Host)
Additional Description
Recall a preset
Recall a preset
X1#
.
Rpr
X1#]
Recall preset
X1#
. Command character is period.
View video and audio mutes
View output mutes
E
VM
}
X1$
1
X1$
2
...
X1$
n
]
Each
X1$
response is the mute status of an output, starting
from output 1. Includes mirrored outputs (such as 3A, 3B, 4A,
4B for 8x6) for a total of two more
X%
s than the number of
outputs (8 for 8x6).
Example:
(DTP CrossPoint 108)
:
E
VM
}
022
...
1
]
Output 1 is unmuted. Audio is muted on outputs 2 and 3,
video is muted on output 8.
Lock (Executive) modes
NOTE
Setting the Front Panel Locks (Executive Modes)
on page 20 for more information on the Lock modes.
Lock all front panel functions
1X
Exe1
]
Enable Lock mode 1.
Lock advanced front panel functions
2X
Exe2
]
Enable Lock mode 2.
Unlock all front panel functions
0X
Exe0
]
Enable Lock mode 0.
View lock status
X
X1%]
Information requests
Information request
I
DTPCP108
]
One of several responses shown as an example.
Request part number
N
60-
nnnn
-
nn
]
See the Extron website for part number.
Query irmware version
Q
X1^]
Example:
Q
1
.
23
]
The factory-installed switcher controller irmware version is
1.23 (sample value only).
NOTE
:
X1#
= Preset
01
through
32
X1$
= Video and audio mute status
0
= video unmuted
1
= video mute
2
=
video and sync mute
X1%
= Lock mode
0
= lock mode 0 (unlocked)
1
= lock mode 1
2
= lock mode 2 (
default
)
X1^
= Firmware version number to second decimal place (
x
.
xx
)
Summary of Contents for DTP CrossPoint 4K Series
Page 6: ......
