Extron electronics DTP CrossPoint 4K Series, Setup Manual

Page: 29 / 44

21 DTP CrossPoint 4K Series • Front Panel Operations
Selecting Lock Mode 2 or Toggling between Mode 2 and
Mode 0
NOTES:
•
If the switcher is in Lock mode 0 or mode 1, this procedure
selects mode 2. The
Esc
,
Video
, and
Audio
buttons blink
twice.
•
If the switcher is in Lock mode 2, this procedure selects
mode 0 (unlocks the switcher). The
Video
and
Audio
buttons blink twice.
Toggle the lock on or off by pressing and holding the
Enter
,
Video
, and
Audio
buttons simultaneously until the buttons blink
(approximately 2 seconds).
Lock mode 2
Lock mode 0
CONTROL I/O
AUDIO VIDEO
I/O
AUDIO VIDEO ENTER PRESET VIEW ESC
CONTROL I/O
AUDIO VIDEO ENTER PRESET VIEW ESC
CONTROL I/O
AUDIO VIDEO ENTER PRESET VIEW ESC
Press and hold for 2 seconds.
Press and hold for 2 seconds.
Selecting Lock Mode 2 or Toggling between Mode 2 and
Mode 1
NOTES:
•
If the switcher is in Lock mode 0 or mode 1, this procedure
selects mode 2. The
Esc
,
Video
, and
Audio
buttons blink
twice.
•
If the switcher is in Lock mode 2, this procedure selects
mode 1. The
Video
and
Audio
buttons blink twice.
Toggle the lock on and off by pressing and holding the
Video
button and the
Audio
button simultaneously for approximately
2 seconds.
Lock mode 1
Lock mode 2
I/O
AUDIO VIDEO
I/O
AUDIO VIDEO
CONTROL I/O
AUDIO VIDEO ENTER PRESET VIEW ESC
I/O
AUDIO VIDEO
Press and hold
for 2 seconds. Press and hold
for 2 seconds.