19
DTP CrossPoint 4K Series • Front Panel Operations
Assigning a Logo to an Output
The switcher can display a logo on one or more of the scaled outputs.
The following table identifies the TP outputs by matrix size.
Matrix
Outputs
Matrix
Outputs
10x8
5 through 8
8x6
3 through 6
8x4
3 and 4
8x2
1 and 2
NOTES:
•
The switcher has memory space for 16 bit-mapped logo files.
•
Logos are created and saved using the Product Configuration
Software (see
installing and Starting the Control Programs
on page 28 and the
PCS Help file
).
1.
Press and release the Logo
Select
button.
SELECT
SELECT
1 2 3 4 5 6 7
LOGO
LOGO
The button lights.
Press and release.
Lit input buttons identify saved logo files.
INPUTS
2.
Press and release the input button for the desired logo file.
3
The button blinks to indicate the selection.
3.
Press and release one or more output buttons to assign the
logo to those outputs.
5 6
ENTER
The buttons indicate the selection.
Blinking indicates the need
to confirm the assignment.
4.
Press and release the
Enter
button.
Viewing and Adjusting Volume and Mic Volume
Rotate the applicable knob clockwise
VOLUME
MIC VOLUME
to increase the program volume or mic
volume. Rotate the knob counterclockwise
to decrease volume.
The LED ladder indicates the approximate
volume; the more LEDs are lit, the higher the volume.
