5. Click
Add New Server
and enter
20.20.20.20
as the server and
a1b2c3d4
as the secret key.
6. Click
Save
.
CLI Command Configuration Example
configure ter
interface vlan 1
ip address 20.20.20.120 255.0.0.0
exit
exit
radius-server host 20.20.20.20 timeout 5 retransmit 3 key a1b2c3d4
dot1x re-authentication
dot1x system-auth-control
interface GigabitEthernet 1/1
dot1x port-control auto
802.1x Timer Parameters
Item
Parameter (sec)
Description
1
ReAuth Period
ISW will restart authentication after each Reauth-Period when
authentication success and ReAuth option is enabled
2
Quiet Period
ISW will wait QuietPeriod to restart authentication process again
when authentication failed in previous time.
3
Tx Period
ISW will send EAP-request to Supplicant every TxPeriod when
authentication is running and Quiet Period is not running.
4
Supplicant Timeout
ISW will wait SupplicantTmeout to receive response from Supplicant.
5
Server Timeout
ISW will wait ServerTimeout to receive response from
server.
ISW Application Guides
802.1x Timer Parameters
ISW Series Managed Industrial Ethernet Switch Hardware Installation & User Guide
73
