3. Select
Configuration
>
VLANs
and create a VLAN with VLAN ID 100.
4. Enter a VLAN name in the
Name
field. In this example, we set tagged VLAN100 on PORT1 and
PORT2.
CLI Configuration
interface GigabitEthernet 1/1
switchport trunk native vlan 100
switchport trunk allowed vlan 1,100
switchport trunk vlan tag native
switchport mode trunk
!
interface GigabitEthernet 1/2
switchport trunk native vlan 100
switchport trunk allowed vlan 1,100
switchport trunk vlan tag native
switchport mode trunk
Example 2: SPQ with Shaping
We send two Streams (Stream0, Stream1) from port1 to port-2. Both streams each have 100 Mbps.
Stream0 includes
Priority0, Stream1 includes VLAN Priority7. Stream3 and Stream4 only for
learning which make sure the traffic are not flooding.
Expected Result
We expect PORT-2 only can receive 20Mbps of Stream1, and 80Mbps of Stream0. This case will help
you to understand how SPQ works on the ISW.
Figure 13: VDSL port VLAN Priority & Queue Mapping
ISW Application Guides
Application Examples
ISW Series Managed Industrial Ethernet Switch Hardware Installation & User Guide
61
