MDI/MDIX Auto-crossover
Support straight or cross wired cables
Auto-negotiating
10/100/1000 Mbps speed auto-negotiation; Full and half duplex
Ethernet isolation
1500 VRMS 1 minute
SFP (pluggable) Ports
Port types supported
SFP (pluggable) Ports 100/1000Base SFP slot
Support 100/1000BaseT SFP transceiver
Fiber port connector
LC typically for fiber (depends on module)
Optimal fiber cable
Typical 50 or 62.5/125
μ
m for multimode (mm);
Typical 8 or 9/125
μ
m for single mode (sm)
Network Redundancy
Fast failover protection rings
Single & Multiple rings supported
Spanning Tree Protocol
IEEE 802.1D STP, IEEE 802.1w RSTP, IEEE 802.1s MSTP
Port Trunk with LACP
Static trunk or Dynamic via LACP
Bridge, VLANs & Protocols
Flow control
IEEE 802.3x (Full Duplex) and Back-Pressure(Half Duplex)
Types
Port-based VLANs
IEEE 802.1Q tag-based VLANs
IEEE 802.1ad Double Tagging (Q in Q)
Multicast protocols
IGMP (Internet Group Management Protocol)
v1, v2
IGMP snooping and querying
Immediate leave and leave proxy
Throttling and filtering
IEEE 802.1ab LLDP
Traffic management & QoS
Priority
IEEE 802.1p
Number of queues per port
8
Scheduling schemes
SPQ, WRR
Traffic Shaper
Port-based shaping
Security
Port security
IP and MAC-based access control
IEEE 802.1X authentication Network Access Control
Power
Power input
Redundant Input Terminals
Input voltage range
Max. power consumption
Non-POE mode: 12–58 VDC
802.3af POE mode 46–58 VDC
802.3at POE mode 50–58 VDC
Power Consumption: 15 Watts without POE PD loading
Reverse power protection
Yes
Total PoE output power budget
PoE PSE port output power
management
120W (ISW 16801) / 240W (ISW 16803)
Scheduling; power control; PoE PD power consumption monitoring
Industrial Series Switch Overview
Technical Specifications
ISW Series Managed Industrial Ethernet Switch Hardware Installation & User Guide
15
