5. Send frames between PORT3 and PORT4 (see test result below).
Configuring Two-directional MAC Address with All VLAN Permit Filtering (CLI Commands)
access-list ace 5 ingress interface GigabitEthernet 1/3 policy 5 frametype etype smac
00-00-00-00-00-13 dmac 00-00-00-00-00-11
exit
interface GigabitEthernet 1/3
switchport trunk allowed vlan 4,5
switchport trunk vlan tag native
!
interface GigabitEthernet 1/4
switchport trunk allowed vlan 4,5
switchport trunk vlan tag native
exit
Configuring One-directional MAC Address with Copy Frame Action (don’t care VLAN, Ether Type) –
Web UI
1. Navigate to
Configuration
>
Security
>
Network
>
ACL
>
Access Control List
.
2. Create a new
Profile (profile name:
CopyFrameTest
).
ISW Application Guides
Case 1: ACL for MAC Address
ISW Series Managed Industrial Ethernet Switch Hardware Installation & User Guide
45
