Extreme Networks x-605, Instruction Manual

Page: 24 / 36

Charging of NiCd/NiMH battery
DEC
-
Batt type
Stop
Elapsed
time
INC
+
DEC
Start
Enter
-
INC
+
Charged
capacity
Battery
type
Charge
current
Battery
voltage
This program is for charging of NiCd/NiMH batteries associated with R/C
models applications. You can press START/ENTER key to make it blink
and then INC or DEC to change the parameter value. Press
START/ENTER key to store the value.
22
CHARGING OF NICD/NIMH BATTERY
The screen shows the real-time status. Press BATT TYPE/STOP key to
end the program. The sound will emitted to indicates the end of program.
Charging NiCd/NiMH battery in the charge mode
‘>3 second’
This program charge the battery using the current you set up. In the auto state, you should set up
the upper limit of the charge current to avoid damage by excessive feeding current. Some batteries
of low resistance and capacity can lead to higher current in the auto charging mode. But in the
manual mode, it will charge with the current you set. You can make it blink in the current field and
press INC and DEC simultaneously to swap between Auto and Manual Mode. NOTE: Allowable fast
charge current: 1C-2C.