Extreme Networks x-605, Instruction Manual

Page: 29 / 36

STORAGE DATA PROGRAM
Storage data program
For your convenience, X-605 has a data storage and load program. It can store five battery data
representing the respective specifications of batteries. You can call back the data when charging
or discharging without setting up the program again. Press START/ENTER key to make it blink,
and use INC or DEC to set up the parameter.
Voltage
DEC
DEC
Data
number
INC
INC
Capacity
DEC
DEC
DEC
-
- -
INC
INC
INC
+
+
+
Type of
battery
Start
Enter
Start
Enter
Batt type
stop
DEC DEC
- -
INC
INC
+ +
Start
Enter
Set up the charge/ discharge sequence and cycle number.
Set up the discharge current and final voltage.
Set up the charge current in the manual mode, or current limit in the auto
mode. Press INC and DEC key simultaneously to make the current field
blink to switch the charge mode.
Setting of the parameter in the screen will not affect the charge and
discharge process. They just present the specification of the battery.
The example is NiMH battery pack, including 12 cells, the capacity is
3000m Ah.
Saving the data
27
‘>3 second’
‘>3 second’