Extreme Networks x-605, Instruction Manual

Page: 20 / 36

INC
INC DEC
DEC
-
-
+
+
Start
Enter
Batt type
Stop
Start
Enter
Charged
capacity
Number
of
cells
Charging
time
Charging
current
Battery
voltage
The left side of the first line shows the type of battery
you choose. The value on the left of the second line of
the charger is current user set, After setting the
current and voltage, press START/ENTER key for more than
3 seconds to start the process.(charge current: 0.1-
5.0A, voltage: 3.7-22.2V).
This displays the number of cells you set up and the processor
detects. “R” shows the number of cells detected by the charger
and “S” is the number of cells set by you at the previous screen.
If both numbers are identical you can start charging by press
START/ENTER button. If not, press BATT TYPE/STOP button to
go back to previous screen to carefully check the number of cells
of the battery pack before going ahead.
This screen shows the real-time status during charge
process. Press BATT TYPE/STOP key once to stop the
charge process.
BALANCE CHARGING OF LITHIUM BATTERY
Balance charging of lithium battery
This function is for balancing the voltage of Lithium-polymer battery cells while charging. In the
balance mode, the battery needs to have a balance lead to connect to the individual balance port
at the right side of the charger. And you need to connect the battery's power lead to the output of
charger.
Charging in this mode is different from the normal modes, because the built-in processor
monitors voltage of individual cell and control input current fed into each cell to equalized
voltage of individual cell.
Charging lithium battery in the balance mode
18
‘>3 second’