Extreme Networks EPICenter 5.0, Manual, Page: 51 / 208

Using the EPICenter Alarm System
EPICenter Concepts and Solutions Guide 51
Figure 19: The Basic tab of the New Alarm Definition window
2 Click the Scope tab, and do the following:
a
Make sure the
All devices and ports
checkbox is not checked.
b Select “Port” in the Source Type field.
c Select the device (“Summit_24”) from the Device list.
d Select the port (“10”) from the ifIndex list.
e Click the Add button to add Summit_24 port 10 to the Selection list.
The information in the Scope tab should look as shown in Figure 20.