manualshive.com logo in svg

Extreme Networks EPICenter 5.0, Manual, Page: 162 / 208

Share
Download
Extreme Networks EPICenter 5.0 Manual Download Page 162

 

162

EPICenter Concepts and Solutions Guide

Policy Manager Overview

•

Changes made through the ExtremeWare CLI or ExtremeWare Vista on a device managed by the 
EPICenter server

•

A user login or end station reboot when DLCS is enabled 

•

Saving a change to a policy within the Policy Manager

If Auto Configuration is disabled, you must explicitly perform the configuration process using one of 
the directed configuration functions initiated using the 

Configure

 or 

Configure All

 buttons on the 

Policy Manager toolbar.

The EPICenter policy server also supports policy enabling and disabling, and policy configuration 
through an external access protocol and API. External applications can use Tcl functions to enable and 
disable policies, and to configure policies on specified devices. The external access protocol and Client 
Tcl API are documented in Appendix E of this manual. 

EPICenter Policy Limitations

The EPICenter Policy Manager does not support the entire set of policy-based QoS features found in the 
most current versions of the ExtremeWare software. In addition, not all versions of the ExtremeWare 
software support all the features available through the Policy Manager. 

Summary of Contents for EPICenter 5.0

















































































































































































































Reviews:

No comments