Extreme Networks EPICenter 5.0, Manual

Page: 199 / 208

The VlanMgr Utility
EPICenter Concepts and Solutions Guide 199
Table 12 specifies the options you can use with this command:
Table 12: VlanMgr command options
Option Value Default
-user <username> EPICenter user name. This option is required. None
-password <password> EPICenter user password. If the password is blank, do not include this
argument. No
password
-host <hostname | IP
address> EPICenter server hostname or IP address localhost
-port <port> EPICenter server port number 80
-help Displays syntax for this command None
Create a new VLAN:
-create <VLAN name> Create a new VLAN of the specified name. None
-dip <IP address> IP address of device to add to VLAN. This option may be repeated. None
-port <ports> Ports to be added to VLAN as untagged ports on
the device specified by the preceding -dip
option. These options
must immediately
follow the -dip
option to which
they apply.
Each option may
be specified once
per -dip option.
No
untagged
ports
-tagport <ports> Ports to be added to the VLAN as tagged ports
on the device specified by the preceding -dip
option. No tagged
ports
-ipf Enable IP forwarding for this VLAN on the
specified device.
IP
forwarding
disabled
-ip <IP address>/<subnet
mask> Set an IP address and submask for this VLAN on
the specified device. Format is xx.xx.xx.xx/nn No ip
address
-tag <number> Set a tag value for the VLAN. Untagged
-protocol <protocol name> Set protocol filter. ANY
Modify VLAN configuration:
-modify <VLAN name> Reset the configuration of the specified VLAN to the options specified
in this command. None
-dip <IP address> IP address of device to be included in the VLAN. This option may be
repeated. None