2. 2 Combo 100/1000 Mbps SFP ports supporting fiber or copper connection
3. 2 1/10 Gbps SFP+ ports for fiber or copper connection
Figure 1: VSP 4450GTX-HT-PWR+
1. USB 2.0 port
Note:
The VSP 4450GTX-HT-PWR+ model does not require a USB device in the USB port for normal
operation. The USB port can be used for file transfer of configs and logs using a USB drive.
2. Switch LEDs
3. 10/100/1000 Mbps PoE+ ports (LEDs above ports)
4. Combo 100/1000 Mbps SFP slots. Supports 1Gbps SFPs and 100 Mbps low speed SFPs.
5. 1 Gbps SFP+ slots. Supports 1 Gbps SFPs and 10 Gbps SFP+s.
6. Console Port
Electrostatic discharge
This section provides information and procedures to prevent electrostatic discharge during
installation.
Preventing electrostatic discharge damage
Electrostatic discharge (ESD) is a discharge of stored static electricity that can damage equipment
and impair electrical circuitry. Electrostatic voltages can result from friction including, pulling cabling
through conduits, walking across carpeted areas, and building static charge in clothing. When you
improperly handle electronic components, ESD damage occurs and can result in complete or
intermittent failures. While networking equipment is commonly designed and tested to withstand
common mode ESD events, voltage can sometimes discharge to some connector pins, which can
potentially damage the networking equipment.
Caution:
To protect the VSP 4000 against ESD damage, take the following measures before you connect
data cables to the device:
• Always use antistatic wrist straps. Make sure you adjust the strap to provide good skin
contact.
Electrostatic discharge
August 2018
Installing the Virtual Services Platform 4450GTX-HT-PWR+
17
