2 Use a small straight-tip screwdriver to align and tighten the retaining screw at each end of the cable
connector.
See
the following figure
.
Figure 47: Connecting a Cable to the E4G-B16T1E1 Module
Note
Although shielded cables are used in most central office applications, Extreme Networks
E4G routers do not require shielded cables to comply with emissions and immunity
requirements.
First-Time Startup
An E4G series router starts when it is connected to a power source.
When a router starts for the first time, it can take up to 40 minutes for the clock function to stabilize
and allow the T1 lines to hold synchronization.
Fans in the router might not start immediately when the unit is connected to power. This is normal: the
system cycles the fans on and off automatically in response to the unit's cooling requirements.
Refer to the
ExtremeXOS Quick Guide
for information about configuring ExtremeXOS for your E4G
router.
Installing an E4G Series Router
E4G Routers Hardware Installation Guide
63
