Table 13: Authorities on Electrical Codes (continued)
Organization
Address
Web Site URL
Electronics Industries Alliance (EIA)
Trade association that develops technical standards,
disseminates marketing data, and maintains contact with
government agencies in matters relating to the electronics
industry.
EIA
2500 Wilson Boulevard
Arlington, Virginia 22201
USA
www.eia.org
Federal Communications Commission (FCC) (USA only)
Commission that regulates all interstate and foreign electrical
communication systems that originate in the United States
according to the Communications Act of1934. The FCC
regulates all U.S. telephone and cable systems.
FCC
445 12th Street S.W.
Washington, D.C. 20554
USA
www.fcc.gov
Equipment Location
Observe the following recommendations when locating your equipment.
Note
Extreme Networks recommends that you consult an electrical contractor for commercial
building and wiring specifications.
•
Be sure that your system is readily accessible for installation and service.
See
Rack and Cabinet Specifications and Recommendations
on page 27 for information.
•
Use appropriate AC or DC power, power distribution, and grounding for your specific installation.
•
Use a vinyl floor covering in wiring closets or other indoor equipment locations.
Concrete floors accumulate dust, and carpets can cause static electricity.
•
Prevent unauthorized access to equipment locations by providing door locks.
Install the equipment in a secured, enclosed, and restricted access location, ensuring that only
qualified service personnel have access to the equipment.
•
Provide adequate overhead lighting for easy maintenance.
•
Be sure that each equipment location has a suitable ground.
All equipment racks and equipment installed in the closet should be grounded.
•
Be sure that all system environmental requirements are met, such as ambient temperature and
humidity.
Refer to the following topics for details.
Temperature
It is important to keep installed equipment within the thermal operating specifications for optimum
performance and safety.
Site Preparation
E4G Routers Hardware Installation Guide
25
