4 Using a 1/4-inch straight-tip torque screwdriver, tighten the retaining screw to 20 pound-inches
(2.25 Newton-meters).
Figure 19: Grounding the E4G-200 Router
5 Connect the other end of the wire to a known reliable earth ground point at your site.
Preparing the DC Power Input Cable
Before connecting the E4G-200 router to DC power, prepare the DC power input cable.
1 Strip 0.25 inch (6.4 mm) from the ends of two lengths of #14 AWG copper wire.
2 On the provided connector, identify the positions where you will attach the wires.
Table 16: Wire Positions in the DC Connector
DC Power Source
–Connection
+Connection
–48 VDC
48 RTN
–48 V
+24 VDC
+24 V
GND
Installing an E4G Series Router
E4G Routers Hardware Installation Guide
41
