Altitude 4700 Series Access Point Product Reference Guide
615
Adopting an Adaptive AP Manually
To manually enable the Access Point’s controller discovery method and connection medium required for
adoption:
1
Select
System Configuration
>
Adaptive AP Setup
from the Access Point’s menu tree.
2
Select the
Auto Discovery Enable
checkbox.
Enabling auto discovery will allow the AAP to be detected by a controller once its connectivity
medium has been configured (by completing steps 3-6)
3
Enter up to 12
Controller IP Addresses
constituting the target controllers available for AAP connection.
The AAP will begin establishing a connection with the first addresses in the list. If unsuccessful, the
AP will continue down the list (in order) until a connection is established.
4
If a numerical IP address is unknown, but you know a controller’s
fully qualified domain name
(FQDN), enter the name as the
Controller FQDN
value.
5
Select the
Enable AP-Controller Tunnel
option to allow AAP configuration data to reach a controller
using a secure VPN tunnel.
6
If using IPSec as the tunnel resource, enter the IPSec
Passkey
to ensure IPSec connectivity.
7
Click
Apply
to save the changes to the AAP setup.
Summary of Contents for Altitude 4700 Series
