Altitude 4700 Series Access Point Product Reference Guide
145
Configuring Dynamic DNS
The Access Point supports the Dynamic DNS service.
Dynamic DNS
(or DynDNS) is a feature offered by
www.dyndns.com
which allows the mapping of domain names to dynamically assigned IP addresses via
the WAN port. When the dynamically assigned IP address of a client changes, the new IP address is
sent to the DynDNS service and traffic for the specified domain(s) is routed to the new IP address.
NOTE
DynDNS supports only the primary WAN IP address.
To configure dynamic DNS for the access point:
1
Select
Network Configuration
>
WAN
>
DynDNS
from the access point menu tree.
2
Select the
Enable
checkbox to allow domain name information to be updated when the IP address
associated with that domain changes.
A username, password and hostname must be specified for domain name information to be
updated.
NOTE
The username, password and hostname are required to be registered at
http://www.dyndns.com
.
Summary of Contents for Altitude 4700 Series
