manualshive.com logo in svg

Extreme Networks Altitude 4700 Series, Product Reference Manual

Share
Download
Extreme Networks Altitude 4700 Series Product Reference Manual Download Page 55

 

Altitude 4700 Series Access Point Product Reference Guide

55

11

The Access Point is ready to configure. For information on an Access Point default configuration, see 

“Getting Started” on page 63

. For specific details on Access Point system configurations, see 

“System 

Configuration” on page 77

.

Above the Ceiling (Plenum) Installations

An above the ceiling installation requires placing the Access Point above a suspended ceiling and 
installing the provided light pipe under the ceiling tile for viewing the rear panel status LEDs of the 
unit. An above the ceiling installation enables installations compliant with drop ceilings, suspended 
ceilings and industry standard tiles from .625 to .75 inches thick. 

NOTE

The Altitude 4700 Series Access Points are Plenum rated to UL2043 and NEC1999 to support above the 

ceiling installations.

CAUTION

Extreme Networks does not recommend mounting the Access Point directly to any suspended ceiling tile 

with a thickness less than 12.7mm (0.5in.) or a suspended ceiling tile with an unsupported span greater than 
660mm (26in.). Extreme Networks strongly recommends fitting the Access Point with a safety wire suitable for 
supporting the weight of the device. The safety wire should be a standard ceiling suspension cable or equivalent 
steel wire between 1.59mm (.062in.) and 2.5mm (.10in.) in diameter.

The mounting hardware required to install the Access Point above a ceiling consists of:

●

Light pipe

●

Badge for light pipe

●

Decal for badge

Summary of Contents for Altitude 4700 Series









































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands