manualshive.com logo in svg

Extreme Networks Altitude 4700 Series, Product Reference Manual

Share
Download
Extreme Networks Altitude 4700 Series Product Reference Manual Download Page 559

 

Altitude 4700 Series Access Point Product Reference Guide

559

AP4700>admin(system.fw-update)>set

Defines access point firmware update settings and user permissions.

Syntax

admin(system.fw-update)>set fw-auto enable

admin(system.fw-update)>set cfg-auto enable

admin(system.fw-update)>set file 3.0.0.0-29D

admin(system.fw-update)>set path c:/fw

admin(system.fw-update)>set server 157.235.111.22

admin(system.fw-update)>set user mudskipper

admin(system.fw-update)>set passwd muddy

For information on updating access point device firmware using the applet (GUI), see 

“Updating Device 

Firmware” on page 118

. 

set

fw-auto

<mode>

When enabled, updates device firmware each time the firmware versions 
are found to be different between the access point and the specified 
firmware on the remote system. 

cfg-auto

<mode>

When enabled, updates device configuration file each time the confif file 
versions are found to be different between the access point and the 
specified LAN or WAN interface. 

file

<name>

Defines the firmware file name (1 to 39 characters).

path

<path>

Specifies a path for the file (1 to 39 characters). 

server

<ip>

The IP address for the FTP/TFTP server used for the firmware and/or 
config file update.

user

<name>

Specifies a username for FTP server login (1 to 39 characters). 

passwd

<password>

Specifies a password for FTP server login (1 to 39 characters). Default is 
extreme.

Summary of Contents for Altitude 4700 Series









































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands