Extreme Networks Altitude 4700 Series, Product Reference Manual

Page: 244 / 648

Configuring Access Point Security
Altitude 4700 Series Access Point Product Reference Guide
244
Therefore, the interval should be set according to the perceived risk of rogue devices and the criticality
of MU performance.
CAUTION
Using an antenna other than the Dual-Band Antenna could render the access point’s Rogue AP Detector
Mode feature inoperable. Contact your Extreme Networks sales associate for specific information.
To configure Rogue AP detection for the access point:
1 Select Network Configuration > Wireless > Rogue AP Detection from the access point menu tree.
CAUTION
Users cannot define a rogue detection method when one of the Access Point radios is functioning as a
WIPS sensor. To use one of the radios as a detector, you must disable WIPS sensor mode first, then set a radio
for the desired detection method.
2 Configure the Detection Method field to set the detection method (MU or access point) and define the
802.11a/n or 802.11b/g/n radio to conduct the rogue AP search.