Access Player Menu (in the middle of a game)
[Mapping joysticks/buttons, cheats, etc.]
●
HOLD DOWN P1’s 1 START Button
/OR “Shazaam”
button
and then Push RIGHT on P1’s Joystick.
To
resume game, repeat same command. Warning: Do NOT
make changes to “INPUT GENERAL,” only “THIS
MACHINE.” This will be covered in detail later in this
manual.
Create and Access Favorite (Games) in
HyperSpin Menus (
Note: Favorites are created by
genre or game system – not overall)
●
When you are at a game menu in HyperSpin (like
ARCADE Classics),
Press P1’s 6
th
Button (2
nd
row, 3
rd
from the left
), or alternatively, Push P3’s Joystick DOWN
Turn Bevel Side Art On and Off
●
Press P1’s START Button
/OR “Shazaam” button
and
Push UP P1 Joystick
Filter Games by Genre (Fighting, Shooting,
Sports, etc.) in a HyperSpin Game Menu
●
When you are at a game menu in HyperSpin (like
ARCADE Classics),
Press P1’s 5
th
Button (2
nd
Row, 2
nd
from left)
Refocus HyperSpin if it Stalls
●
Move Trackball in a Circle and Push the LEFT Trackball
Button (AUX Switch should be in Right position).
Reset Game or Machine if an
Emulator/Game/Machine Hangs and
Completely Stops Working
1. HOLD DOWN P1’s START Button
/OR “Shazaam” button
and then Press P2’s START Button (if this fails go to 2).
2. Press and Hold the Power Button Until the Machine
Turns Off. Wait 30 seconds and turn machine back on.
(Note: there are some additional things to try, but these
are done in Windows and will be covered in the Back
End/Windows section of this manual).
A. Boot Up -
When you push the power button and turn on one of the systems, the machine goes through a
“boot-up” procedure. After about 20 seconds you will see an operating system logo and then a
Windows Desktop which includes the Extreme Home Arcades contact information and logo. There is
nothing to do at this point, just let the machine continue to “boot-up” and eventually the Windows
desktop will disappear and a HyperSpin introduction movie will begin. Press any button or move any
Joystick on the Joystick/Control Panel to skip the movie. This will take you to the HyperSpin Main
Menu or Main Wheel.
B. Navigating HyperSpin Menus, Loading Games and Exiting Games
HyperSpin menus are easy to navigate. Push UP or DOWN on P1’s Joystick (P2’s
Joystick works as well) to go through the HyperSpin wheel. HyperSpin boots up at
the Main Wheel. The “Top of the Main Wheel” is SYSTEM or ARCADE (also known
as Arcade Classics). For example, if you wanted to load a PlayStation game, at the
Main Wheel you would push UP or DOWN on P1 or P2’s Joystick until you came to
PlayStation (see photo). Note: this can take a few second since there are so many
emulators to choose, from but eventually you will see PlayStation.
Extreme Home Arcades – Operation Manual - 21 |
Page
Summary of Contents for EHA
