Extreme Home Arcades EHA, Operation Manual

Page: 117 / 125

Replacement System Install Instructions:
1. Remove Power supply on left side of machine, 4 screws and cut the cable ties that hold
wires in place. New PC has this power supply built in and to make space to fit this case
inside your machine the original supply has to come out.
2. You will need to cut the black and yellow wires that go to your small black relay (turns on
your other accessories like lighted parts on control panel, light box, and sound system) Cut
them about 2" from the pink (or blue) crimp connectors) You will strip back about 1/4" on
these wires and they will be crimped into the new connectors with pink crimp connectors
coming off the new computer.
3. Install the case in your machine, best fit is usually having all the connections towards the
sub woofer but push the case as far left (near where the power supply is now on the left side
of the cabinet) to open up room to plug all your connections to the back side of the new
computer.
4. Plug all connections in to the new system board, note there are two extra USB ports on
the top of the case that extra connections can plug into after the 4 normal USB ports are
used on the system board.
5. Plug the small two pin connector (purple wires) into the small connector that comes from
your power button (turns everything on)
Extreme Home Arcades – Operation Manual - 116 | Page