Extreme Flight Legacy Aviation Turbo Bushmaster, Manual

Page: 56 / 61

67. When the glue for the exhaust stacks is fully cured, tear 4
short pieces of painter’s tape and place each piece of tape on
the side of the fuselage so that each piece corresponds with one
of the 4 cowl mounting tabs. Use a felt tipped pen to mark the
location of the center of each mounting tab.
68. Slide the Cowl into position. Install the spinner onto the
motor shaft for reference and once satisfied with the cowl
position, roll the tape back into place and secure the cowl. Use a
1/16” drill bit to drill a hole at the location of the dot on each
piece of tape.
56