Extreme Flight Legacy Aviation Turbo Bushmaster, Manual

Page: 45 / 61

canopy glue or sewing it on with screws (not included). Also, a pair
of Lexan car body scissors will make this step much easier!
52. Locate the windscreen. Crudely trim it so that you can place it
into position.
53. Use blue tape to mark a cut line with the tape being placed inside
the line where you will trim the canopy. This will help to prevent the
canopy edges from splitting while being cut.
54. Test fit and trim as needed. Attach canopy with a thick bead of
canopy glue and tape in place with painters tape and allow to dry
overnight. Alternately you could sew the canopy in place with
multiple small screws. Photos of both attachment methods are
shown.
45