Extreme Flight Legacy Aviation Turbo Bushmaster, Manual

Page: 7 / 61

5. Install the control horns into their respective slots and wipe
away any excess epoxy with a paper towel or cloth soaked with
denatured alcohol.
6. In these next steps we will install the hinges. Please take a few
moments to familiarize yourself with this process if you have not
installed hinge points before.
There are several ways to do this and several adhesives you can
use. We will describe the way that we do it, as this method has
proven itself over many years of model building. If you are new
to this type of hinging process, then I recommend that you
install a single hinge first just to acquaint yourself with this
method
Before starting you will need to gather a few items to aid you as
you proceed.
A. 30 Minute Epoxy
B. A short length of pushrod or small dowel.
C. A roll of paper towels
D. Denatured alcohol or Acetone
E. Hobby Knife
F. Silicon lubricant
7