Extreme Flight Legacy Aviation Turbo Bushmaster, Manual

Page: 61 / 61

This concludes the assembly process for the Turbo Bushmaster.
Preparing for flight!
With the wing and struts attached, place your battery on the
battery tray and pick up the Bushmaster by the wing tube. Shift
the battery until the plane balances on the tube. This is a safe
location to begin test flying. Adjust CG to your liking, then mark
the tray to know where to position the battery each flight.
Typically the plane balances with the battery centered on the
tray just forward of the wing tube as shown in the photo for step
number 71.
It is recommend you first fly the model in standard configuration
to get used to its flight characteristics before beginning to
experiment with flaps. When deploying flaps you will need to
add an elevator mix that compensates for the flaps and provides
a few degrees of down elevator. A comprehensive and detailed
setup document written by designer Cody Wojcik will cover
various mixes to exper
i
m
e
nt with and will be posted on the
Extreme Flight website.
Thanks so much for your business and we hope you enjoy flying
your Turbo Bushmaster as much as we have!
61