Extreme Flight Legacy Aviation Turbo Bushmaster, Manual

Page: 34 / 61

38. Push the control rod carefully until you feel resistance,
locate the area where the control rod is trying to poke thru the
covering and use a sharp hobby knife or soldering iron to
remove the covering from this location. It is easiest to do this
with the fuselage upside down in a stand.
39. Place the tail wheel assembly up against the lower keel and
center it on the bottom of the fuselage . When you are happy
with the placement, use the holes in the tailwheel bracket as a
guide and drill three 5/64” holes. Add a drop of CA to each hole
and then attach the Tailwheel using the supplied wood screws.
Now would be a good time to thread the ball link onto the control
rod and attach it to the center hole of the tiller arm.
34