1
B
a
30
ENGLISH
COMbUSTION CHAMbER
By means of a mechanical system, the burn pot is cleaned automatically at preset intervals.
It is however advisable to remove any residues by using a vacuum cleaner.
Suck the ash deposited between the partition and the fire holder (1).
Remove the ash conveyor by lifting it at the back (A).
Clean the combustion chamber and the bottom of the burn pot completely, using a suitable vacuum cleaner.
Refit the ash conveyor by performing the same operation in reverse.
always make sure that:
- that the ash conveyor rests on the burn pot correctly, and not on another area of the combustion chamber.
- the ash conveyor is installed in the correct direction for pellet feed.
- the ash conveyor has been pushed towards the rear wall of the hearth (B)
THE iMAgES ARE foR illUSTRATiVE PURPoSES.
