27
ENGLISH
cLEaNiNG
This function allows to open the burn pot base, facilitating the combustion chamber cleaning operations.
with the stove cold and switched "
OFF
", activate the
cLEaNiNG
function.
Once the burn pot bottom has been opened completely, scrape the walls of the combustion chamber using the special tool supplied and let
the residual ash drop into the ash drawer.
CONTrOLs PrOCeDUre:
Press key 6
Press 3 until
SEttiNGS
appears and confirm by pressing 6
Keep pressing 3 until
cLEaNiNG
appears and confirm by pressing 6 and wait for the burn pot bottom to open.
scrape the walls of the combustion chamber using the special tool supplied and let the residual ash drop into the ash drawer.
Press key 1 to end and wait for the main screen to reappear.
OPEN thE DOOR ONLY WhEN thE OPERatiON iS cOMPLEtE! thE DiSPLaY WiLL iNDicatE that thE DOOR haS BEEN OPENED!
OUtLEt aiR
This function allows any air in the stove to be discharged. By activating the pump function, it will be powered alternatively with 30 second
work phases and 30" stop for 15 minutes. with the stove cold and "
OFF
", activate the
OUtLEt aiR
function and press 6 to confirm. To
interrupt, press and hold key 1 for 3 seconds.
CONTrOLs PrOCeDUre
Press key 6.
Press key 3 until
SEttiNGS
appears and confirm by pressing key 6.
Press key 3 until
OUtLEt aiR
appears and confirm by pressing key 6.
Use keys 4-5 to enable "
ON
" / disable "
OFF
"
Press key 1 several times to confirm and exit the menu.
EaSY cONtROL
The function allows for two values to be set:
OFF
(disabled - factory default)
ON
(enabled)
activation (
EaSY cONtROL
=
ON
) is recommended in the event that there is an excessive formation of combustion residues in the flue
during operation at reduced power (see FLUe exHaUsT chapter).
Caution! It is advisable to activate the
EaSY cONtROL
function under the supervision of a qualified technician.
CONTrOLs PrOCeDUre
Press key 6.
Press key 3 until
SEttiNGS
appears and confirm by pressing key 6.
Keep pressing 3 until
EaSY cONtROL
appears and confirm by pressing 6.
Use keys 4-5 to enable "
ON
" / disable "
OFF
"
Press key 1 several times to confirm and exit the menu.
RESEt
allows the user to reset all editable values to the default values.
CONTrOLs PrOCeDUre
Press key 6.
Press key 3 until
SEttiNGS
appears and confirm by pressing key 6.
Press key 3 until
RESEt
appears and confirm by pressing key 6.
Use keys 4-5 to enable "
ON
" / disable "
OFF
"
Press key 1 several times to confirm and exit the menu.
dePressure notICe
it allows you to activate the buzzer for acoustic warnings if the door or the hopper are open.
please note: activation can reduce battery life by 30%.
Battery life depends on use.
CONTrOLs PrOCeDUre
Press key 6.
Press key 3 until
SEttiNGS
appears and confirm by pressing key 6.
Keep pressing 3 until
DEPRESSURE NOticE
appears and confirm by pressing 6.
Use keys 4-5 to enable "
ON
" / disable "
OFF
"
Press key 1 several times to confirm and exit the menu.
