36
Chapter10
CLEANING
Chapter10
CLEANING
CLEANING THE BRAZIER
The brazier must be cleaned daily.
Remove the brazier from its container and clean
the holes using the supplied relevant tool (see
fi gure 11.1).
Remove the ash from the brazier using a vacuum
cleaner.
Suck-up the ash deposited in the brazier
compartment
USE OF SCRAPERS
Cleaning the heat exchangers guarantees a constant
heat yield over time. This type of maintenance must
be carried out at least once a day. To do this just use
the appropriate scrapers positioned in the upper part
of the stove, performing the horizontal movement
several times.
CLEANING OF ASH COLLECTION
COMPARTMENTS
The ash collection compartments (indicated in fi gure
11.3) should be emptied as needed using a vacuum
cleaner.
CLEANING THE HEAT EXCHANGER
(MONTHLY)
The heat exchanger chamber has to be cleaned
once a month because the ash residue deposited on
the back of the cast iron furnace wall obstructs the
regular fl ue gas fl ow.
To be able to access the heat exchangers, it is
necessary to remove the central part of the furnace
wall as described below:
Remove the brazier from its frame
Rotate the door latch by 180° (fi gure 11.5).
Take the pull-out cast iron and rotate it
downwards.
Remove it from the combustion chamber by
pulling it towards you. Pay attention to the two
lateral cast iron levers.
fi gure 10.1
fi gure 10.2
fi gure 10.3
fi gure 10.4
Summary of Contents for Comfort Mini
