Extraflame Comfort Mini, User Manual

Page: 30 / 48

30
Chapter8
USER MENUS
The programming procedure can be carried out with the stove on or off , and involves the following
steps:
Press 4. menu 1
D
the display will show “ ROOM TEMP SET ”
Press 5. menu 1 again
D
the display will show “ MENU SET CLOCK ”
Press button 5 6.
D
the display will show “ CRONO SET MENU ”
Press 7. menu 2 to confi rm
Once you enter the programming area, the display will show the following:
Parameter ut 0
D
CRONO ON-OFF
Use buttons 4 and 5 to enable/disable the weekly programmer.
To confi rm and continue with programming, press the
menu 2 button.
To return to the previous parameter, press the menu 1 button .
Parameter ut 1
D
START PROGRAM 1
Use buttons 4 and 5 to adjust switch on time for the fi rst time period 00:00 to 23:50, or to disable it by
pressing
OFF .
To confi rm and continue with programming, press the menu 2 button.
To return to the previous parameter, press the menu 1 button .
Parameter ut 2
D
STOP PROGRAM 1
Use buttons 4 and 5 to set the end of the fi rst time period from 00:00 to 23:50 or to disable the function by
setting it on
OFF .
To confi rm and continue with programming, press the menu 2 button.
To return to the previous parameter, press the menu 1 button .
Parameter ut 3
D
DAYS ON 1
Used for setting which days of the week to enable/disenable the time period set.
The procedure is as follows:
button 5 a.
D
to scroll the days
button 4 b.
D
to enable/disenable ( ON/OFF ) the fi rst time period for that day
To confi rm and continue with programming, press the menu 2 button.
To return to the previous parameter, press the menu 1 button .
Parameter ut 5
D
START PROGRAM 2
Use buttons 4 and 5 to set the start of the second time period from 00:00 to 23:50 or to disable the
function by setting it on OFF.
To confi rm and continue with programming, press the menu 2 button.
To return to the previous parameter, press the menu 1 button .
Parameter ut 6
D
STOP PROGRAM 2
Use buttons 4 and 5 to set the end of the second time period from 00:00 to 23:50 or to disable the function
by setting it on OFF .
To confi rm and continue with programming, press the menu 2 button.
To return to the previous parameter, press the menu 1 button .
Parameter ut 7
D
DAYS ON 2
Used for setting which days of the week to enable/disenable the time period set.
The procedure is as follows:
button 5 a.
D
to scroll the days