Extraflame Comfort Mini, User Manual

Page: 31 / 48

31
USER MENUS
Chapter8
button 4 b.
D
to enable/disenable ( ON/OFF ) the fi rst time period for that day
To confi rm and continue with programming, press the menu 2 button.
To return to the previous parameter, press the menu 1 button .
Parameter ut 8
D
START PROGRAM 3
Use buttons 4 and 5 to set the start of the third time period from 00:00 to 23:50 or to disable the function
by setting it on
OFF .
To confi rm and continue with programming, press the menu 2 button.
To return to the previous parameter, press the menu 1 button.
Parameter ut 9
D
STOP PROGRAM 3
Use buttons 4 and 5 to set the end of the third time period from 00:00 to 23:50 or to disable the function
by setting it on
OFF .
To confi rm and continue with programming, press the menu 2 button.
To return to the previous parameter, press the menu 1 button.
Parameter ut A
D
DAYS ON 3
Used for setting which days of the week to enable/disenable the time period set.
The procedure is as follows:
button 5 a.
D
to scroll the days
button 4 b.
D
to enable/disenable ( ON/OFF ) the fi rst time period for that day
To confi rm and continue with programming, press the menu 2 button.
To return to the previous parameter, press the menu 1 button.
TO ENABLE/DISENABLE the weekly programmer, follow the procedure described at parameter 1 of the
Set Clock Menu .
When the programmer is enabled, the corresponding LED lights up on the display (see Table of Display
Messages). Manual controls always have priority over the programming.
DAY/NIGHT MENU
The day/night temperature function makes it possible to switch the stove on/off automatically based on
two selected temperatures.
This system enables you to select one temperature for daytime and one for night.
To access the parameters of the day/night temperature function, proceed as follows:
Press the 1. menù 1 button
D
the display will show “ ROOM TEMP SET ”
Press the 2. menù 1 button again
D
the display will show “ CLOCK SET MENU ”
Press button 5 twice 3.
D
the display will show “ DAY NIGHT MENU ”
Confi rm with the 4. menu 2 button .
When you have entered the programming function, the display will show the following parameters:
Parameter ut A
D
DAY NIGHT
Use buttons 4 and 5 to enabling/disenabling the day/night temperature function.
To confi rm and continue with programming, press the
menu 2 button.
To return to the previous parameter, press the menu 1 button .