CO80 V3.1 04/06
21
4.6.3 Printing Any Saved Report
To print any saved report, press the “
Log
” button followed by the “
Scroll
”
button. The “
” display at the bottom of the screen will now flash.
Pressing “
Pressure
” will scroll up through the saved reports by number,
pressing the “
Clock
” button will scroll the saved reports down a number.
Select the report you wish to print and press and hold the
“Log”
key for
two seconds until a “beep” is heard. The required report will be printed.
The printer must be turned on with its IR port pointing at the IR port of the
CO80 (
see 2.10 for additional information
) in order for the printing to
commence.
4.6.4. Deleting the Last Report
The CO80 saves 50 combustion reports and 25 CO room test reports.
When the memory is full and a new reading is taken, the oldest report is
overwritten.
To delete the last logged report, press the
“Log”
key. Pressing the
“Pressure”
key will show the last report saved and
“del”
will flash.
Keeping hold of the
“Log”
key for two seconds will delete the last report
once a “beep” is heard. Display 1 will now be displayed once the report
has been deleted.
4.6.5. Deleting All Reports
Pressing
“Log”
then the
“Scroll”
key twice displays the screen “
ALL 50
”.
Pressing
“Pressure”
now brings up a flashing “
del
” under “
ALL 50
”.
Press and hold the
“Log”
key for two seconds until a “beep” is heard,
when all 50 combustion reports will be deleted.
4.6.6. Sending a Report
Press the “
Log
” key and the “
Scroll
” key twice and “
Send
” will flash on the
display. Press and hold the
“Log”
key for two seconds until a “beep” is
heard, when all 50 combustion reports will be sent either to the printer or
PC. The display will automatically revert to the Display 1, as shown in
Section 2.6.
WARNING
“Sending” all saved sets of readings when in HP mode, will result in all 50
memory locations printing out, which will take approximately one hour.
