manualshive.com logo in svg

Extech Instruments CO80, Manual

Share
Download
Extech Instruments CO80 Manual Download Page 48

  CO80    V3.1     04/06 

48 

Warranty 

EXTECH INSTRUMENTS CORPORATION warrants this instrument to be free of defects 
in parts and workmanship for two years from date of shipment (a six month limited 
warranty applies on sensors and cables). If it should become necessary to return the 
instrument for service during or beyond the warranty period, contact the Customer 
Service Department at (781) 890-7440 ext. 210 for authorization or visit our website at 

www.extech.com

  (click on ‘Contact Extech’ and go to ‘Service Department’ to request an 

RA number). A Return Authorization (RA) number must be issued before any product is 
returned to Extech. The sender is responsible for shipping charges, freight, insurance 
and proper packaging to prevent damage in transit. This warranty does not apply to 
defects resulting from action of the user such as misuse, improper wiring, operation 
outside of specification, improper maintenance or repair, or unauthorized modification. 
Extech specifically disclaims any implied warranties or merchantability or fitness for a 
specific purpose and will not be liable for any direct, indirect, incidental or consequential 
damages. Extech's total liability is limited to repair or replacement of the product. The 
warranty set forth above is inclusive and no other warranty, whether written or oral, is 
expressed or implied. 
 

Calibration and Repair Services 

Extech offers complete repair and calibration services for the products we sell. For periodic 
calibration, NIST certification or repair of an Extech product, call customer service for 
details on services available for that product. Extech recommends that calibration be 
performed on an annual basis to ensure calibration integrity. 
 
 
 
 
 
 
 
 
 

 

Copyright 

©

 2006 Extech Instruments Corporation. 

All rights reserved including the right of reproduction 

in whole or in part in any form.

 

 

 

Support Hotline (781) 890-7440 

Tech support: Ext. 200; Email: 

[email protected] 

Summary of Contents for CO80

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands