CO80 V3.1 04/06
29
5.1.3. Pressure and Temperature Readings
For some types of boilers (for example, oil boilers), the temperature
readings need to be displayed with the pressure readings in order to assist
with the boiler set up.
If no temperature probes are connected, no temperature readings are
displayed, unless a reading has already been stored on the outlet setting
(see below)
.
To have both flow and return readings, two thermocouples must be
connected
(see section 2.9)
.
To measure and store the outlet (Flue) temperature, connect the
thermocouple to the outlet port (
see section 2.9
).
Place the probe thermocouple at the required location and press
“Light”
until a beep is heard – the current value reading is stored at the bottom of
the display.
The stored value can be overwritten at any time by pressing and holding
the
“Light”
key twice until “beeps” are heard.
