CO80 V3.1 04/06
19
4.6.
Reports
Once a stable set of readings is displayed on the screen of the CO80, the
next step is to save (or log) this data to the internal memory in the
instrument for future output to a printer, or download to a PC or laptop
computer. (See appendix D for details on how to communicate with a PC.)
The CO80 saves 50 combustion reports and 25 CO room test reports.
When the memory is full and a new reading is taken, the oldest report is
overwritten. By pressing the “
LOG
” button, the following will be displayed
in the bottom left hand corner of the screen:
4.6.1 Saving a Report
Keeping hold of the
“Log”
key for two seconds will save the last report
once a “beep” is heard. With “
Save
” flashing on the display, press and
hold down the “
Log”
button for approximately 2 seconds - the instrument
will save a full set of readings to the next available memory location. The
CO80 will “beep” to confirm that the report has been saved.
