manualshive.com logo in svg

Extech Instruments CO80, Manual, Page: 39 / 48

Share
Download
Extech Instruments CO80 Manual Download Page 39

  CO80    V3.1     04/06 

39 

6. 

Calibration and Service

 

 
It is recommended that the unit be calibrated annually. Please consult with 
Extech Instruments for further details at 781-890-7440 or 
support@extech.com. The consumable parts for the instrument are: 
 

•

 

Filter elements 

•

 

Silicon tubing 

•

 

Oxygen cell 

•

 

CO cell 

 
The cells are contained within the instrument and are not user 
replaceable. 

 

WARNING 

Replacement or attempted replacement of the oxygen and carbon 
monoxide cells by any other party other than a trained Extech official 
service partner will invalidate any outstanding warranty. 

 

7. Guarantee

 

 
Your new CO80 is guaranteed free from defects in materials and 
workmanship for a period of two years from date of purchase, provided 
that: 
 

•

  The product has been used only for its intended purpose, and not 

been subjected to damage by misuse, or wilful or accidental damage. 

 

•

  The product must not have been tampered with or repaired by anyone 

other than a trained and certified Extech Instruments official service 
partner. 

 

•

  Should the serial number on your CO80 be tampered with in any way, 

then the guarantee will be considered null and void. 

 
This guarantee does not affect your statutory rights. 

 

Summary of Contents for CO80

















































Reviews:

No comments