Extec I-C13 Impactor, Operating And Maintenance Manual

Page: 23 / 292

Ver: IC13-EN-10567 Safety Instructions Page 13
I-C13 Impactor
• Never add gasoline or any other fuels mixed to diesel because of increased fire or
explosion risks and damage to the engine.
• Do not carry out maintenance on the fuel system near naked lights or sources of sparks,
such as welding equipment or whilst smoking.
• To avoid spillages use drip trays.
• Immediately clear up spilt fuel and dispose of correctly to minimise any environmental
impact.
1.14 Specific Hazards
1.14.1 Electrical Energy
External Considerations and Hazards
When working with the plant, maintain a safe distance from overhead electric lines. If overhead
cables are in the vicinity a risk assessment must be completed prior to operating this equipment.
If your plant comes into contact with a live wire;
• Vacate the area,
• Warn others against approaching and touching the plant,
• Report the incident and have the live wire de-energized.
Machine - Electrical
Work on the electrical system or equipment may only be carried out by a skilled and qualified
electrician or by specially instructed personnel under the control and supervision of such an
electrician and in accordance with applicable electrical engineering rules.
The power supply to the plants, on which inspection, maintenance and repair work is to be
carried out must be isolated before starting any work. Check the de-energised parts for presence
of power and ground or short circuit them in addition to insulating adjacent live parts and
elements.
The electrical equipment of the plant is to be inspected and checked at regular intervals. Defects
such as loose connections or scorched or otherwise damaged cables must be rectified
immediately.
Use only original fuses with the specified current rating. Switch off the plant immediately if
trouble occurs in the electrical system.
This plant is wired on a negative earth. Always observe correct polarity.