Extec I-C13 Impactor, Operating And Maintenance Manual

Page: 35 / 292

Ver: IC13-EN-10567 Commissioning and Operation Page 25
I-C13 Impactor
Section 4 Commissioning and Operation
4.1 Pre-Start Instructions
Before starting this machine it is important that the instructions below are followed:
1. Ensure that this manual is read and understood.
2. Do not attempt to start this machine until you are aware of all aspects of its operation.
3. Remove any temporary sealing and transport straps.
4. Check that the machine is in good mechanical condition and that there is no component
damage or loss.
5. Ensure that all bolts and fixings are tight and that all guards are in place with all safety
devices operating correctly. Never start this equipment without guards and safety
devices operating correctly.
6. Ensure that crusher chamber feeder and conveyor belts are free of material.
7. Remove all tools and equipment from the operational area.
8. Ensure all personnel are well clear of the machine, drives, tracks and auxiliary
equipment.
9. Ensure that the pre-start checks outlined in the engine manufacturer's instruction manual
are complied with.
10. Check the oil levels in the engine and vibrating feeder.
11. Check that all drums and rollers turn freely. This must be done by hand. (Never attempt
to touch the drums or rollers whilst the machine is running.)
12. Ensure that the skirting rubbers and scrapers are in good condition and working properly.