Extec I-C13 Impactor Operating And Maintenance Manual Download Page 42

Page: 42 / 292

Page 32

Commissioning and Operation

Ver: IC13-EN-10567

I-C13 Impactor

Fitting the bogie and attaching the tractor for transportation is a reversed procedure to that

describe above.

12: Hopper back door being raised.

13: Raise hopper back door.

14: Hopper back door being raised.

15: Hopper sides fully raised.

16: Remove connection panel & umbilical cord completely from machine.

IMPORTANT:

Before transporting with the bogie fitted ensure that the jacking legs

are fully retracted and the leg transportation retaining screw have been refitted and

tightened to prevent the legs from dropping.

Summary of Contents for I-C13 Impactor





































































































































































































































































































Search results

Summary of Contents for I-C13 Impactor

Reviews:

Related manuals for I-C13 Impactor

Brands by name

Popular brands

Extec I-C13 Impactor, Operating And Maintenance Manual

Search results

Summary of Contents for I-C13 Impactor

Reviews:

Related manuals for I-C13 Impactor

Brands by name

Popular brands