Exodraft EBC22, Instructions Manual

Page: 14 / 48

14 | UK
Your energy. Optimized.
Outdoor fitting of the pressure transducer (XTP)
If there is a risk of adverse effect from strong winds, the hose (A)
located inside the XTP 150G can be removed from the (+) valve.
If the pressure transducer is positioned in a place where insects have
access to the free end, fitting a sinter filter is recommended.
Layout of the user interface
A
B
C
D
E
F
Pos. Part Function
A Alarm • indicates alarms
B
Display • displays operation and changes in the user interface (menu system)
• indicates alarms
• shows normal operation status
C
and • forward or back in the menu system
• increase/reduce set point
D
• reset alarm
• return to operation screen
E
• select menu item
• confirm/save change of set point (must be confirmed with OK (the current
• set point blinks rapidly) and is saved using OK within 5 seconds (or the setting will not be
saved)
F Light emitting diodes • shows status of inputs and outputs
Make sure to position the pressure transducer
the right way up.
Do not blow into the valves on the XTP 150 G
A