Exodraft EBC22, Instructions Manual

Page: 10 / 48

10 | UK
Your energy. Optimized.
Technical specifications
The EBC22 is an automatic control system for single and multiple gas boiler installations and for other
installations in which singularor multiple heat sources are connected to the same chimney. The control may
only be used with Exodraft fans. The EBC22 system consists of an EBC22 controller, which can be positio -
ned anywhere, and a pressure transducer (XTP 150G sensor) which is positioned near the chimney.
The EBC22 control is approved accordingly to the gas directive by Kiwa Gastec.
The EBC22 controller monitors and maintains a specific draught by maintaining a constant pressure. The
pressure in the chimney is measured by the XTP 150G sensor. If the draught falls outside the set point
value the speed of the fan is modulated to achieve the target draught. If it is not possible to maintain the
draught at or above the set point then the controller will automatically disconnect the boiler(s).
Technical data
Data EBC22
H x W x D [mm] 204,3 x 239,5 x 77,2
Weight 1,62 kg
IP-rating / material IP54 / ABS PA758
Voltage 230 V AC ±10 %, 50 Hz ±1 %
Max power consumption 475 W
Fuse T4A
Temperature -20 °C to 60 °C
Monitoring range -500 Pa to +500 Pa