TTX Series DC Actuator Installation & Maintenance Instructions |
3
www.exlar.com
| 952.500.6200
1.0 INTRODUCTION
1.1 GENERAL PRODUCT DESCRIPTION
The Tritex TTX Series is Exlar’s latest family of fully integrated
linear actuators. They feature a robust planetary roller screw
mechanism integrated into the rotor of a brushless servomotor
and drive. This unique design combines the high speed and
high load capacity of the roller screw with the high torque-to-
volume ratio of the brushless servomotor. This manual applies
only to the Tritex TTX DC actuators. Other manuals will cover
Tritex TTX AC actuators. All the required power components
and the motion processor are contained in the actuator housing.
Commissioning software and set-up uses the Exlar Expert
™
software tools used on all Tritex II integrated actuators
Actuator Mechanical Specifications and Ratings
Please refer to the Tritex TTX Standard Product Catalog for
mechanical specifications and output force ratings. The catalog
also contains available model options and ordering information
for specific model selection.
Tritex TTX Series actuators feature an Ingress Protection
Rating of IP66S.
1.2 PRODUCT FEATURES
Figure 1 –
Tritex TTX060 Series Actuator features
Motor & Roller
Screw Housing
RS485 Port: Modbus RTU
Configuration or Command
Ethernet Port:
EtherNet/IP
PROFINET
Modbus TCP
Actuator Main Rod
Power Connector:
Main and Control Power,
GND (PE)
Electronics Housing
Figure 1 –
Tritex TTX080 Series Actuator features
Electronics Housing
Actuator Main Rod
Motor & Roller
Screw Housing
Ethernet Port:
EtherNet/IP
PROFINET
Modbus TCP
RS485 Port: Modbus RTU
Configuration or Command
Power Connector:
Main and Control Power,
GND (PE)
